From 8b68c42d89ba5ade6c6e5f80e7aec1936bcab761 Mon Sep 17 00:00:00 2001
From: SMLinux <smlinux@pktsurf.in>
Date: Mon, 14 Feb 2022 12:24:45 +0530
Subject: [PATCH] Renamed upper case variable names to lower case in
 bldpkg.conf

---
 bldpkg.conf | 91 +++++++++++++++++++++++++++--------------------------
 1 file changed, 46 insertions(+), 45 deletions(-)

diff --git a/bldpkg.conf b/bldpkg.conf
index 22d9218..ae0a2db 100644
--- a/bldpkg.conf
+++ b/bldpkg.conf
@@ -9,37 +9,37 @@
 
 # Set the package extension. Makepkg will use this to figure out the 
 # compression utility. Pick one out of tbz/tgz/txz/tlz. 
-PKGEXT="tlz"
+pkgext="tlz"
 
 # Set compressor options. These will be exported in the mkfinalpkg function 
 # for makepkg to pickup.
-SM_GZIPOPTS="-9c"
-SM_BZIPOPTS="-9c"
-SM_LZIPOPTS="-0c"
-SM_XZOPTS="-9c"
+gzipopts="-9c"
+bzipopts="-9c"
+lzipopts="-0c"
+xzopts="-9c"
 
 # Set this variable if you wish to be prompted for installing (or upgrading) 
 # the package after it has been built successfully. 0 to disable, 1 to 
 # enable. Ignored for SSB autobuilds.
-SM_INSTALLPROMPT=0
+installprompt=0
 
 # Set this variable if you wish to be prompted for extracting contents of 
 # the newly-built package installer file into a new subdirectory called 
 # "test" within the current source directory the build was invoked from. 0 
 # to disable, 1 to enable. Ignored for SSB autobuilds.
-SM_EXTRACTPROMPT=0
+extractprompt=0
 
 # Whether to use distcc for distributed compilations. 0 to disable, 1 to 
 # enable.
-SM_GLOBALDISTCC=0
+globaldistcc=1
 
 # Whether to use ccache for faster consecutive rebuilds. Set 0 to disable, 
 # 1 to enable.
-SM_GLOBALCCACHE=0
+globalccache=1
 
 # Whether to use sccache for faster consecutive builds. Set 0 to disable,
 # 1 to enable.
-SM_GLOBALSCCACHE=0
+globalsccache=0
 
 # Typical $PATH layout when using ccache + distcc + gcc, assuming gcc is in 
 # /bin, should be:
@@ -54,19 +54,19 @@ SM_GLOBALSCCACHE=0
 # Replace distcc with ccache for creating distcc symlinks
 
 # Distcc binary location
-SM_DISTCCBINPATH="/bin/distcc"
+distccbinpath="/bin/distcc"
 # Distcc symlink paths created for cc/gcc/c++/g++
-SM_DISTCCSYMPATH="/opt/distcc/bin"
+distccsympath="/opt/distcc/bin"
 
 # Ccache binary location
-SM_CCACHEBINPATH="/bin/ccache"
+ccachebinpath="/bin/ccache"
 # Ccache symlink paths created for cc/gcc/c++/g++
-SM_CCACHESYMPATH="/opt/ccache/bin"
+ccachesympath="/opt/ccache/bin"
 
 # Sccache binary location
-SM_SCCACHEBINPATH="/bin/sccache"
+sccachebinpath="/bin/sccache"
 # Scache hardlink paths created for cc/gcc/c++/g++
-SM_SCCACHEPATH="/opt/sccache/bin"
+sccachepath="/opt/sccache/bin"
 
 # Define the distcc timeout period in seconds. This prevents distcc from 
 # falling back to local compiler if a distributed job takes a long time to 
@@ -77,60 +77,61 @@ DISTCC_IO_TIMEOUT="1800"
 # distcc manual for complete info. Must be defined in /etc/hosts unless they
 # are an IP. Tip: Distcc by default will use only 2 cores on the local 
 # machine.
-DISTCC_HOSTS="--randomize localhost/3 host0/2,lzo"
+DISTCC_HOSTS="--randomize localhost/2 host0/2,lzo"
 
 # Add sum total of the above CPU cores/threads or add your own count 
 # prepended with "-j". 
-SM_CPUTHREADS="-j5"
+cputhreads="-j4"
 
 # Declare a parent temporary directory
-SM_PARENTTMP="/tmp"
+parenttmp="/tmp"
 
 # Whether to use tmpfs for the package build. The package source will be
 # extracted and compiled inside the tmpfs directory and ccache will be 
 # disabled to prevent writes to the disk. 1 to enable, 0 to disable.
-SM_USETMPFS=0
+usetmpfs=1
 
 # Set the tmpfs directory if the above variable is enabled
-SM_TMPFSDIR="$SM_PARENTTMP/tmpfsdir"
+#SM_TMPFSDIR="$SM_PARENTTMP/tmpfsdir"
+tmpfsdir="$parenttmp/tmpfsdir"
 
 # Define the nontmpfs base directory
-SM_NONTMPFSDIR="$SM_PARENTTMP/sml"
+nontmpfsdir="$parenttmp/sml"
 
 # Directory where the final package installer, example: 
 # openssh-8.1-x86_64-1sml.tlz should be placed in. Again, should be outside 
 # tmpfs dir. Also declared and defined in autobuild section file, so values 
 # may differ. This is for manual builds.
-PKGDEST=${PKGDEST:-$SM_PARENTTMP/sml/packages/}
+pkgdest=${pkgdest:-$parenttmp/sml/packages/}
 
 # Whether you want to preserve the build directory which contains the 
 # extracted source, for example /tmp/sml/openssh.src/openssh-8.1. 
-# SM_USETMPFS, if set to 1, will auto-reset this variable to 0 and the build
+# usetmpfs, if set to 1, will auto-reset this variable to 0 and the build
 # directory will be deleted. Set 1 to preserve it, 0 to rm -rf it 
 # automatically at the end of each build
-SM_PRESERVEBUILDDIR=1
+preservebuilddir=1
 
 # Whether you want to preserve the package directory. for example 
 # /tmp/sml/package-openssh SM_USETMPFS, if set to 1, will auto-reset this 
 # variable to 0 and the package directory will be deleted. Set 1 to preserve
 # it, 0 to rm -rf it automatically at the end of each build
-SM_PRESERVEPACKAGEDIR=1
+preservepackagedir=1
 
 # Whether to show build summary. Set to 1 to enable, 0 to disable.
-SM_SHOWSUMMARY=0
+showsummary=1
 
 # Whether to show colours in the build summary. Set 1 to enable, 0 to 
 # disable. Also, only show colours if the build is invoked manually and not 
 # through the SSB autobuild system where logging is automatic or when 
 # logging is invoked using log ./<package.SMBuild>.
-[ -z "$SM_COLOURS" ] && SM_COLOURS=1
+[ -z "$colours" ] && colours=1
 
 # Define whether to check for swap. 1 to enable, 0 to disable.
-SM_SWAPCHECK=0
+swapcheck=0
 
 # If above variable is set to 1, define minimum swap size required for huge 
 # compiles in KiB
-SM_SWAPSIZE=2048000
+swapsize=2048000
 
 # Define your compilers here. They must be in $PATH *AFTER* ccache and 
 # distcc directories
@@ -142,33 +143,33 @@ export CC CXX
 # https://github.com/sakaki-/gentoo-on-rpi-64bit/blob/master/reference/compile_run_benchmarks.sh
 # https://www.raspberrypi.org/forums/viewtopic.php?t=11629
 # Set debug flag
-SM_GCCDEBUG="-g3"
+gccdebug="-g3"
 # For aarch64
 # aarch64-musl-linux is not recognised by most configure scripts and I haven't
 # seen any compile except for gmp going wrong with arm-musl-linux
-SM_AARCH64HOSTDIST="--host=arm-musl-linux"
-SM_AARCH64BUILDDIST="--build=arm-musl-linux"
-SM_AARCH64CFLAGS="-O2 -fPIC -pipe -march=armv8-a+crc -mtune=cortex-a53"
+aarch64hostdist="--host=arm-musl-linux"
+aarch64builddist="--build=arm-musl-linux"
+aarch64cflags="-O2 -fPIC -pipe -march=armv8-a+crc -mtune=cortex-a53"
 # For x86_64
-SM_X8664BUILDDIST="--build=x86_64-musl-linux"
-SM_X8664CFLAGS="-O2 -fPIC -pipe"
+x8664builddist="--build=x86_64-musl-linux"
+x8664cflags="-O2 -fPIC -pipe"
 
 # Set path to configure cache file that contains predefined answers to several
 # tests autoconf scripts run. Credits: Sabotage Linux. 
-SM_CONFIGSITE="/etc/config.cache"
+configsite="/etc/config.cache"
 
 # Whether to verify tarball checksums contained in checksums.$APP files inside
 # source directories. Path to smlinux public key file and signify binaries 
 # handled by the mkchecksums script.
-SM_VERIFYCHECKSUMS=0
+verifychecksums=0
 
 # Whether to check for build/runtime dependencies
-SM_CHECKDEPENDENCIES=0
+checkdependencies=0
 
 # This array lists the packages whose sources will not be extracted and 
 # compiled inside tmpfs, if tmpfs is <= 2GB. If your tmpfs is >= 2GB, empty
 # out this entire list.
-SM_TMPFSEXCEPTIONLIST=( firefox palemoon qemu dovecot gdb gimp gnumeric \
+tmpfsexceptionlist=( firefox palemoon qemu dovecot gdb gimp gnumeric \
 gtk+2 gtk+3 guile llvm mariadb mesa mesa-demos mupdf perl postfix python2 \
 python3 rtorrent spice python-lxml qtbase kernel libreoffice mono \
 qtwebengine kernel-source rust )
@@ -176,7 +177,7 @@ qtwebengine kernel-source rust )
 # This array lists the packages which require additional swap for
 # compilation to prevent the system from becoming completely unresponsive 
 # for want of more memory.
-SM_PACKAGESREQUIRINGSWAP=( firefox palemoon qemu gdb gimp gnumeric gtk+2 \
+packagesrequiringswap=( firefox palemoon qemu gdb gimp gnumeric gtk+2 \
 gtk+3 guile llvm mariadb mesa mupdf libtorrent rtorrent qtbase \
 qtwebengine )
 
@@ -185,11 +186,11 @@ qtwebengine )
 # expanded as an argument for rm -rf holds, so prevention is better. 
 # Populate this list appropriately and use it inside an if/else whenever 
 # rm -rf is about to be called.
-SM_PROTECTEDDIRECTORIES=( "/bin" "/boot" "/dev" "/etc" "/home" "/include" \
-"/lib" "/lib64" "/libexec" "/local" "/man" "/media" "/mnt" "/opt" "/proc" \
-"/root" "/run" "/sbin" "/share" "/srv" "/sys" "/tmp" "/usr" "/var" )
+protecteddirectories=( "/bin" "/boot" "/dev" "/etc" "/home" "/include" \
+"/lib" "/libexec" "/local" "/man" "/media" "/mnt" "/opt" "/proc" \
+"/root" "/run" "/sbin" "/share" "/srv" "/sys" "/usr" "/var" )
 
 # Whether to output application build status in HTML format. Set 1 to enable,
 # 0 to disable.
-SM_HTMLOUTPUT=0
+htmloutput=1