Simplified bldpkg.conf

bldpkg.conf

@@ -13,10 +13,8 @@ pkgext="tlz"
 
 # Set compressor options. These will be exported in the mkfinalpkg function 
 # for makepkg to pickup.
-gzipopts="-9c"
-bzipopts="-9c"
-lzipopts="-0c"
-xzopts="-9c"
+compressor="plzip"
+compressoropts="-0c"
 
 # Set this variable if you wish to be prompted for installing (or upgrading) 
 # the package after it has been built successfully. 0 to disable, 1 to 
@@ -38,27 +36,30 @@ CXX="g++"
 # https://www.raspberrypi.org/forums/viewtopic.php?t=11629
 # Set debug flag
 gccdebug="-g3"
+
 # For aarch64
 # aarch64-musl-linux is not recognised by most configure scripts and I haven't
 # seen any compile except for gmp going wrong with arm-musl-linux
-aarch64hostdist="--host=arm-musl-linux"
-aarch64builddist="--build=arm-musl-linux"
-aarch64cflags="-O2 -fPIC -pipe -march=armv8-a+crc -mtune=cortex-a53"
+# Cause: packages that require this have prehistoric config.guess files
+builddist="--build=arm-musl-linux"
+# Uncomment as needed. For aarch64
+CFLAGS="-O2 -fPIC -pipe -march=armv8-a+crc -mtune=cortex-a53"
+
 # For x86_64
-x8664builddist="--build=x86_64-musl-linux"
-x8664cflags="-O2 -fPIC -pipe"
+#builddist="--build=x86_64-musl-linux"
+#CFLAGS="-O2 -fPIC -pipe"
 
 # Whether to use ccache for faster consecutive rebuilds. Set 0 to disable, 
 # 1 to enable.
-globalccache=0
+ccache=0
 
 # Whether to use sccache for faster consecutive builds. Set 0 to disable,
 # 1 to enable
-globalsccache=0
+sccache=0
 
 # Whether to use distcc for distributed compilations. 0 to disable, 1 to 
 # enable.
-globaldistcc=0
+distcc=0
 
 # Ccache binary location
 ccachebinpath="/bin/ccache"
@@ -84,11 +85,11 @@ DISTCC_IO_TIMEOUT="1800"
 # distcc manual for complete info. Must be defined in /etc/hosts unless they
 # are an IP. Tip: Distcc by default will use only 2 cores on the local 
 # machine.
-DISTCC_HOSTS="localhost/2 host/2,lzo"
+DISTCC_HOSTS="localhost/2 mx/2,lzo"
 
 # Add sum total of the above CPU cores/threads or add your own count 
 # prepended with "-j". 
-cputhreads="-j4"
+MAKEFLAGS="-j4"
 
 # Declare a parent temporary directory
 parenttmp="/tmp"
@@ -96,7 +97,7 @@ parenttmp="/tmp"
 # Whether to use tmpfs for the package build. The package source will be
 # extracted and compiled inside the tmpfs directory and ccache will be 
 # disabled to prevent writes to the disk. 1 to enable, 0 to disable.
-usetmpfs=0
+tmpfs=0
 
 # Set the tmpfs directory if the above variable is enabled
 tmpfsdir="$parenttmp/tmpfsdir"
@@ -180,12 +181,8 @@ strings strip )
 # 0 to disable.
 htmloutput=0
 
-# Validate distcc, ccache and sccache depending on which compiler is enabled 
-# globally above
-validatecompilers=0
-
 # Be verbose about compiler output. Make and Cmake currently supported.
-compilerverbosity=0
+verbosebuild=0
 
 # Whether to prompt a user to resume a build if 
 # $tmp/src/.$app-$version.extraction.complete is found or to build the package from scratch